[Raytrace] User Defined Optimization Set Up

[John Sherman]

Hi John,

>     Now, what I want is to force an optimization condition so that
>thickness 5 is equal to thickness 0 (though in the opposite direction).  In
>other words, I would like to add the equivalent OCM command word for
>optimizing both total spherical aberration (OCM20) and th[0]+th[5].


Of course, you know OSLO better than me, and are the one who got me going on
it. In my limited fog, I wonder. Can't you optimize for OCM20, and then set
the thickness of 5 by clicking the box there and selecting "Minus
Thickness"? Then choosing 0 to do the minus pickup from?

Good luck,

John